Hi Dimitri,
We can control the timing now by clicking on the number in the circled area.

Is this what you meant?

Absolutely.
The number in the circle is seconds?
Thank you for your response.

It is in milliseconds, so 1 second equals 1000.

If you make a cool macro, please make sure to post it for the community!

acknowledged
thank you

I can only add 1000 between buttons.
I need at least 4-5 seconds from the first button push to the second.
ideas?

Can you help me with a better understanding of how this macro would work in GOW? How you use it? Which GOW title you use it with? I have GOW4 here so I can get an idea of what would be needed.

GOW4 ( really all of the Gears series)
When you hit the RB for the reload it starts the slider moving and you have to hit the RB a second time at a certain time to achieve an active reload. This is what I am trying to accomplish.
The timing is different for different weapons.

On a different note: I could not get the macros to work last night at all.
I hit F11 and I received a single tone.
Entered the macro as shown on the video and saved.
Tried in Simulation and uploaded and still could not get it to work.
I am missing something............
Thoughts?

GOW4 ( really all of the Gears series)
When you hit the RB for the reload it starts the slider moving and you have to hit the RB a second time at a certain time to achieve an active reload. This is what I am trying to accomplish.
The timing is different for different weapons. — Dimitri

Ok, I got it now. I'll have to check with our engineers to see what our timer limitation is and see if it is defaulted to 1 second for memory reasons or otherwise.

On a different note: I could not get the macros to work last night at all. — Dimitri

It seems we may have a bug that affects macros under certain circumstances. I believe we already have a patch in process, but I'd like to get some information to make sure we have everything covered. Do you leave your PC on and connected to the KeyMander when the Xbox One console goes to sleep? Any additional info you can provide would be helpful.

Try this to get back to normal operation.
If not, try this:
1. Save your profile and close the KeyMander software.
2. Unplug the Controller
3. Unplug the Console Port connection
4. Unplug the PC port connection (and Power connection if you have anything connected)
5. Reconnect the controller connection.
6. Reconnect the Console connection.
7. Reconnect the PC connection and restart the KeyMander software.
8. Enter Play Mode or Simulation Mode
9. Press F11.

You should be good to go.