Hi Tohska,

You have both mini USB cables connected, correct? If so, make sure you have the cable running between the console and the KeyMander connected to the Game port, and the cable running between the PC and the KeyMander to the PC port. If you do not have the KeyMander connected to the console, make sure to connect the second mini USB cable between the KeyMander Power port and either an open USB on the PC or a USB power supply (like a charger for smartphones or tablets).

Restore the firmware and re update. Your firmare may be corrupted. It was my case.

I just did a rest and I don't think it worked because my saved stuff was still in there. But every time I try to updates the program goes into loading and exits out then nothing

im having the exact issue

I read about the firmware being corrupt and redownloading it and tried that. I tried opening it through the program and with out it and I got as far as an error about the cord even though I'm usi g the ones they sent. Even though the box was open when I got it, bass were sealed but box was open. Hope my in it is ok, I understand it takes forever to get your settings right bit I can't even get that fare cause I can't update.

Were you going through the software when it failed? If so you can also try the firmware recovery steps here .

Yea I tryed that a few times but I don't think my box reset because my profile I saved was still on there on the first boot up. Is that normal?

If you keep the "gamepademulator" file it will save all profiles that you have in the software so that is normal. So even with the recovery process you could not upgrade the firmware?