The + and - functions on the mouse are for resolution setting of the mouse. Make sure you have it set to maximum. If you want to use those mouse buttons for something else, you will need to install the GME631 mouse driver from here, set the mouse resolution using to 4000dpi (recommended setting for KeyMander) and then program those buttons to be unused keyboard keys such as O and P. Then in the KeyMander software you will set the functions you want on + and - to O and P.

Also, the side thumb buttons, and pushing the middle wheel would not program to anything. The wheel roll forward and back does work.

The side buttons are listed as Forward and Back in the KeyMander software, and the wheel button is called Middle in the KeyMander software. All of those work with the KeyMander so just program them and you should be fine.

When I program the side buttons or middle button for BF 5 they dont do anything. I know macros is on because the default wheel up/down works which is set up in the macro.

(As far as reprogramming the+ and -) what would be the benefit of adjusting the dpi? why not leave it on the higher setting?

Please attach your profile so we can see why your buttons aren't working. As the the +/- buttons, the stock function of the buttons is there for PC users, but KeyMander users can do exactly as you suggested and leave it at max, then use the buttons for something else.

I installed the GME631 mouse driver. There are not any "Names" I could name the button on the mouse driver app that the Keymander app would see and understand.

Hi Dale,
You need to scroll down to Key Combination as shown here:


Then enter a non-used keyboard key such as "P" as shown here:


Then assign the command you want to Keyboard key "P" as shown here:

ok, I get it. I was trying to map it directly to the keymander without using a key from the keyboard. Thank you.