• Moderator [Derek]
    112
    The Division sample profile for Xbox One

    This sample profile has the X and Y aim/look axis unlocked to compensate for the game's super reduced up/down aim/look speed. There is a smooth acceleration curve added to the normal aim/look view to help offset slower max turning speed. There is also a special curve for ADS to provide close to pixel accurate aiming at slower speeds, with some acceleration added to offset the game's reduced turn speed while in ADS mode. Try it out and revise as needed for your preferences. Low dpi gamers will definitely need to reduce the mouse sensitivity and may try a flat mouse curve to be closer to your normal game play style.

    The attached profile was made for the following in-game settings:
    Camera sensitivity: 100%
    Aim sensitivity: 100%
    Scope sensitivity: 100%
    Analog dead zone size: 0%
    Attachment
    XB1 The Division.profile (133K)
  • Armando
    0
    I need help with with my sensitivity set up on division. I'm new to keymander I purchased the keymander with the wireless kaliber gaming keyboard and mouse. I've spent hours watching iogear keymander videos and I feel I have got most of it down pretty good but my main issue is the recoil when I fire my weapons is crazy. How to I set it up to where I feel almost no recoil? Also my mouse is max 2000 dpi I have increased in game sensitivity and set 2000 dpi on keymander a but it still feels choppy, any tips.
  • Moderator [Marco]
    39
    Are you using the sample profile above? Or are you making one from scratch? First thing I would check/adjust would be the deadzone settings.

    Can you send me a screen shot or just give me the numbers you are using in the sensitivity tab of the profile.
  • Moderator [Derek]
    112

    Hi Armando,

    We need to clarify your question. Are you having an issue with the mouse sensitivity, or are you trying to find a way to counteract the game's built-in recoil for specific guns? If you are trying to counter the recoil, we do not have way to do that.
  • Armando
    0
    Yes I started with the sample profile then made changes. My biggest struggle is ads either moves to fast and choppy or moves too slow. Maybe it's to sensitive but when I fire an AR it's feels harder to control and sort of bounces around way to much. I don't understand what settings need increased or decrease. Any help you can give me would be great. Also I got the keymander with wireless k+m bundle but I'm curious if a wired k+m would be better. Also my mouse is max 2000 dpi but would a higher dpi mouse be better?
    Attachment
    IMG_0440 (328K)
  • Moderator [Derek]
    112

    Ok, now I know what you mean. This is the main complaint with The Division, as it has a poor aim/look engine that hasn't been improved in even the newest 1.6 revision. The mechanics have some unpredictable movement in it, including an initial movement lag (not caused by KeyMander) that acts like a non-removable deadzone, plus a low maximum turn speed and some bizarre acceleration curves that bump your look speed at a time you would least prefer it. Try moving the mouse very slowly as if trying to move 1 pixel at a time and you will see the look view doesn't move until you speed up. Start speeding up a bit more and you will see it take off, making it hard to develop a feel for point shooting. This is a game mechanic and something we can't change so must work around the best we can. Make sure you have Aim Assist off or it makes a less than desirable aim/look engine even worse.

    That said, we can definitely improve some things to make the game enjoyable. First, make sure your TV or monitor is set to game mode (if it has one) to lower the input lag as much as possible, TVs are generally worse than monitors as they usually add lag on their own; not a ton, but a noticeable amount which becomes more noticeable with The Division. Second, if you have a mouse with a bit higher max DPI, use it- 4000-5000 DPI is definitely helpful.

    I've been tinkering with the attached profile in The Division 1.6 build. The attached profile also uses the forward mouse button for turn assist, which greatly helps turning a quick 180 to counter the game's low maximum turn speed.

    The attached profile was made for the following in-game settings:
    Camera sensitivity: 100%
    Aim sensitivity: 100%
    Scope sensitivity: 100%
    Analog dead zone size: 0%
    Aim assist: Off
    Attachment
    XB1 The Division T1.profile (133K)
  • McLovins
    0
    whats your Xbox Username?
  • slapierre
    0
    Hi, i have a little have to puth back the curve on normal and now for me its feel super smooth perfect the only thing now its when i aim on sign i feel like its shacking at this point whats doni have to work whit the curve or deadzone?

    Ty
  • Moderator [Derek]
    112

    Hi Ty,
    I'm not quite sure I understand your question. Is the mouse acting jittery? If so, what mouse are you using and what are your settings.
  • slapierre
    0
    I mean, i did change curve to normal due to a low dpi mouse i got its capped at 800 so i feel way better in that way the only the when i normal move or akm its fine my little problem its when i right clic zoom i feel the mouse a bit slow but if i higher de sens the aim start to be shacking
  • slapierre
    0
    Mouse i use its logitec 302
  • Moderator [Derek]
    112

    Your mouse has 4000 dpi resolution, so set it for 4,000 not 800 or you will have to increase the KeyMander's mouse sensitivity so high that the mouse will perform very poorly. Make sure to set the KeyMander to 4,000 dpi as well!
  • slapierre
    0
    Ok ill try that how do inputh keymander at 4000dpi??

    Ty
  • Moderator [Marco]
    39

    Go to the gear in the top right hand corner of the software, then you will see your mouse DPI setting options.
  • sky
    0
    this is mad as so thanks for making this mate but why the hell does my mouse and keys always stick, for example i press w for like 2 seconds and i constantly run or if i look slightly up my mouse will just keep looking up any help with this would be greatly appreciated thanks
  • Moderator [Marco]
    39

    Hello!
    What kind of keyboard and mouse are you using with the keymander?
    Also what version firmware and software are you using?
    Is this going directly to the keymander or using playmode/simulation mode?
bold
italic
underline
strike
code
quote
ulist
image
url
mention
reveal
youtube
tweet
Add a Comment