• Moderator [B]
    3
    Configure keyboard controls on the fly.


    Direct Button Mapping allows you to change keyboard or mouse maps without connecting KeyMander to your PC. Direct Button Mapping requires connection of your PS/Xbox controller to the KeyMander for basic setup.

    To use Direct Mapping:
    1. Connect your controller using your USB cable to the Gamepad port on the KeyMander.
    2. Press Share + Options (PS4), Select + Start (PS3), Back + Start (Xbox) or View + Menu (Xbox One) buttons at the same time. You will hear 1 beep from KeyMander and the Setting LED will flash slowly.
    3. Press PS, Xbox Guide, or Xbox button. KeyMander will beep once again and Setting LED will now flash rapidly. You are now in Direct Mapping Mode.
    a. Press the desired PS/Xbox controller button you wish to map. KeyMander will beep once to confirm.
    b. Press any key on the keyboard or mouse and the controller button will be mapped to that key. KeyMander will beep once to confirm.
    c. Continue steps 3a & 3b until all desired buttons have been mapped to keyboard or mouse.
    4. Press Share + Options (PS4), Select + Start (PS3), Back + Start (Xbox) or View + Menu (Xbox One) buttons at the same time to exit Direct Mapping Mode. KeyMander will beep twice and the Setting LED will stop
  • Eric91
    0
    I bought the keymander yesterday and everything went fine from the firmware updates to creating and mapping the controller for my game ... but my problem is.... everything worked just fine until my xbox went on sleep mode for the first time since i have the keymander... and now since i got my xbox one turn back on .... only the KB options work... controller mode stopped working and i cant have that BEEP sound when i go for quick maping with menu + select button on the controller . whyy !? ive tried everything that people post on forums about cable ( tried 3 of them ..expenssive ones ) 4 controllers .... everything was working just fine... the first time .. my keyboard still beep from F1 to F12 btw
  • Moderator [Marco]
    69

    Try shutting off the Xbox and unplug the power cable once it is fully shut down.
    Reconnect the cable and turn on the Xbox by pressing the button on the xbox.
    Make sure to leave the keymander and the controller connected.
  • flatt
    0
    This was something I was going to try as well. I couldn't get it to work, it's the only thing I can think of to change mapping without a computer
  • Moderator [Marco]
    69

    If you do not have a PC configuring via the direct button mapping is the only way at the moment. Once the app is fully released it should make things easier without a PC.
  • DrRust
    0
    I have a Xbox one s and my keymander is stuck in setting mode. If I hit start and select it won’t take me back out of stetting mode
  • Moderator [Marco]
    69

    Power cycle the keymander and then try the setting mode again.
    Make sure the controller does not have rechargeable batteries.
  • Ryan0404
    0
    So I'm trying to direct button map my keymander on my controller and everything works until the part where I choose what button I want on my controller any tips on how to fix it?
  • Moderator [Marco]
    69

    What console are you on? Are you pressing the middle Sony or the Middle Xbox button before you press the controller button?
  • Ryan0404
    0
    No I'm on Xbox but I press the pause and back button at the same time than I click the Xbox button and it just freezes and I have to unplug the keymander Everytime and it never works
  • Moderator [Marco]
    69
    What kind of controller are you using?

    Does the keymander beep when you press the pause and back button?
  • Ryan0404
    0
    I'm using a standard Xbox controller and yea it does beep
  • Moderator [Marco]
    69

    Is there any way you can try a different cable or even a different controller.
  • Ryan0404
    0
    Witch cable would I have to switch
  • Moderator [Marco]
    69

    The cable from the controller to the keymander.

    If you have the split cable you can use the short micro USB end, this should work.
  • blargensnarf
    0
    The mapping on my xbox one x only beeps if its on the mouse but none of the keyboard keys beep??
  • Moderator [Marco]
    69

    Does the keyboard itself work on the keymander? What kind of keyboard are you using?
  • Austinnolte
    0
    I am unable to change my key binds when pressing “view + menu” on Xbox one. The keymander does not beep when pressing those. Everything is plugged in correctly, tried different cords, tried resetting. I can use the keyboard and mouse just not able to change the key binds. Very irritating
  • Moderator [Marco]
    69

    What kind of controller are you using?
  • Austinnolte
    0
    Xbox one elite controller, will be trying a controller that comes with the Xbox here in a little bit and let you know if that fixes it.
  • Gage123456
    0
    Im getting this same problem the power is lit up and everything is plugged in right, once i press f-1 to F-12 it beeps, it changed all of my keybinds and wont let me go into settings mode to change them
  • Moderator [Marco]
    69

    Did you configure the Keymander via PC before? Or did you always do manually with the controller?
  • Wills
    0
    So I’ve been playing with my settings I’ve used for months but all of the sudden I think I accidentally clicked something and my entire sensitivity went from fast to very slow. I’ve tried resetting everything and even if I play with max sensitivity and max dpi, I still only get 1/2 of the normal speed I was used to. And I can’t aim or do anything that involves mouse space because i have to move my mouse 3 feet to do a 360 degree meanwhile before it only took me 2 inches of movement.
  • Moderator [Marco]
    69

    What console are you on? Have you tried uploading the firmware again?
  • Ferryj
    0
    Is there any way to map keys with only one of the power cords? And do you have to update the firmware to use the direct mapping? And can you update the firmware with one cord? Sorry for all the questions
  • Moderator [Marco]
    69

    To map the keys with our software and a PC you do need two cables, to button map directly with a controller then only one cable is needed. No the upgrade is not needed to direct button map.

    The firmware has to be upgraded with our software so two cables are needed.
  • Ferryj
    0
    Thank you I found my other cable and have learned how to use the direct mapping
  • GILHE
    0
    hi, I have a question about how to sprint, if the left stick sprints when pushed in, how would I map on the app the sprint button, this is for dayz on Xbox one by the way.
bold
italic
underline
strike
code
quote
ulist
image
url
mention
reveal
youtube
tweet
Add a Comment