Yes, both will work fine. If I remember correctly, that keyboard has a USB pass-through on it which does make the keyboard draw a little more current through the USB connector than other keyboards. Do not use that USB port and you should be fine. If for some reason the total power required by the mouse and the keyboard exceeds the USB output of the KeyMander, you can use an additional mini-USB cable connected to the KeyMander's Power port to provide enough current for everything to work properly. Keep in mind that KeyMander only supports the standard 104 keys on a keyboard, so the extra programmable keys on the Black Widow will not have any function.

Hi, I just bought a Razer black widow x chroma. Is this going to work with my keymander ?

I recently bought the Havit Backlit Rainbow Wired Keyboard, and was wanting to know if it will work with my KeyMander. Thanks.

It should work good! We have tested other versions of the black widow and we did not have problems.

Unfortunately we have not tested this keyboard but that does not mean it will not work. Let me know when you get it and if you have any questions!

Okay, will do. It comes in the mail Wednesday so I'll get back to you then. Thank you!

Sounds good!

I must add that customer service is exceptional.

So I got my keyboard in and my Keymanderbin today. So I open my games and my dead zone settings were off. I go to fix them and I adjust it on my computer and it looks fine on my PS4, no movement. But when I hit the OK button it starts to move again. What do I do?

What game and profile are you using? When adjusting the deadzone you should be seeing very small movements.

I would suggest starting with one of our profiles if we have your game title available.

I'm playing Dying Light and I've made a new profile. And i will find the closest game to it and try it out.

Im using a blackwidow x chroma and the RGB lighting doesnt work. Is there anything i could do to get it to work?

Razer keyboards need to be able to see the Razer RGB software/PC for the RGB lights to operate.

You can try connecting the blackwidow directly to a PC then wiring the PC to the keymander and use simulation/play mode with our software.

Thank you ive managed to get it to glow up w only being connected to the keymander but thanks for the reply.

Ok let us know if you need any further assistance.

how you managed to do that? It first flowed as soon I connected it but after I connected it to the computer stopped glowing with the keymander

Help

What keyboard are you using, and have you connected the KeyMander Power port to an additional power supply such as a phone charger to help with the added power needed for certain RGB keyboards?

Yah I solve it .... only need one usb plugged in ... I only had to plug the keyboard to the pc and close the Razer synapses program before unplug the keyboard, will go back to factory settings and then glows with the keymander also .... thanks for the response anyway

Ah, good to know! I haven't had any issues with the Razer's I've tested, but we don't run Synapse. We have had problems with other keyboards like the Corsair K95 that require too much power, so if you have issues in the future with other keyboards just keep the second power source in mind.

I will
Thanks brother